CG Input dynamic range ±(0.5mVp~5mVp)
Differential input impedance ≥10MΩ
Bandwidth 0.05~150Hz (Diagnostic)
0.5~40Hz (Monitoring)
1~20Hz (Operation)
CMRR ≥90dB (Diagnostic)
≥105dB (Monitoring & Operation)
Sensitivity selection ×1/4, ×1/2, ×1, ×2, ×4 and Auto
Sweeping speed 6.25mm/s, 12.5mm/s, 25mm/s, 50mm/s
HR measuring range 15~350bpm
HR accuracy ±1% or ±2bpm, whichever is greater
Pacemaker pulse detection and rejection function
RESP Measuring range 0~120rpm
Measuring accuracy ±5% or ±2 rpm, whichever is greater
NIBP Technique Oscillometric method
Typical measurement time <30 seconds (adult cuff)
NIBP measuring range SYS: 40~275mmHg (Adult)
40~200mmHg (Pediatric)
40~135mmHg (Neonate)
NIBP measuring range DIA: 10~210mmHg (Adult)
10~150mmHg (Pediatric)
10~95mmHg (Neonate)
NIBP measuring range MAP: 20~230mmHg (Adult)
20~165mmHg (Pediatric)
20~110mmHg (Neonate)
NIBP measuring accuracy Mean difference: ±5mmHg
Standard deviation: 8mmHg
NIBP measurement mode Manual, Auto, STAT, Multi-cycle mode
Auto measuring intervals 1-480min
SpO2 Technique Dual-wavelength optical method
Measuring range 0%~100%
Measuring accuracy Arms is not greater than 2% for SpO2 range 70~100%.
PR measuring range 30~250bpm
PR measuring accuracy ±2bpm or ±2%, whichever is greater
Low perfusion performance As low as 0.3%.
Cerebral State Monitoring (CSM) EEG sensitivity ±400µV
Noise level <2µVp-p, <0.4µV rms (1~250Hz)
CMRR >140dB
Input impedance >50Mohm
CSI and update 0-100. filter: 6-42Hz, 1 sec. update
EMG% 0-100 (logarithmic), filter: 75-85 Hz, 1 sec. update
BS% 0-100. filter: 2-42 Hz, 1 sec. update
IBP Technique Strain gauge transducer
Input sensitivity 5µV/V/mmHg
Measuring range -50~300mmHg
Measuring accuracy ±2% or ±4mmHg, whichever is greater
Measuring positions ART, RAP, PA, LAP, CVP
Calibration zero calibrating
Cardiac Output (C.O.) Blood temperature 23-43℃, accuracy: ±0.5℃
  measuring: range
  Injecta temperature 0-20℃, accuracy: ±0.5℃
  measuring: range
  Measuring range 0.2~20 L/min
  Measuring accuracy ±0.2 L/min or ±10%, whichever is greater
Other Specifications Power supply AC 100V-240V, 50/60Hz, 60VA
Built-in lithium battery 11.1V/4400mAh
Display 12.1 inch TFT display
Alarming method 3 levels audible-visible alarm
Networking Ethernet
Standard configuration ECG, Respiration, SpO2, PR, NIBP, Temperature
Bình chọn sản phẩm: (5.0 / 3 Bình chọn)