Hydrogen Peroxide Plasma Sterilization Equipment

Giá bán :

NEW ERA IN STERILIZATION HRF 3000 HRF 3000 is a sterilizer for plastic, organic, electromechanic tools and surgical, medical equipments which are sensitive to heat and humudity and re-sterilises disposable materials used in hospitals, laboratories etc... By re-sterilizing the expensive surgical tools, it inhibits them from throwing as a waste material. It decreases the operation and medical diagnosis. Hydrogen Peroxide Gas Plasma Technology.

Detail

User friendly, easy to operate
Extends the lifetimes of medical instruments and tools
Cost-effective
Increases the productivity
Colour Touch-Screen Display
Limited access for authorized users for system security
Tyvek® pouches compatible
No residual toxic waste
No need for extra aeration
Personnel safety & Environment friendly
10^-6 Sterility Assurance Level
H₂O₂ Tube Cartridges & Gallon

HRF 3000 (H₂O₂)Hydrogen Peroxide Plasma Sterilization Device, work with low temperature, does not needs humidity and does not creates toxic residues. It can be used for sterilization of metals and non metal materials, expensive tools.

It has HRF system which generates plasma to convert Hydrogen Peroxide used in sterilization into water and oxygene. So, this system does not have any toxic residue. It does not need any assembly or montage. It has only power connection. It can be set in between the range 35C-55C. It does not damage plastic or electronic equipment. You can confidently sterilize camera heads, fiber optic cables, rigid and flexible endoscopes.

STERILIZATION PROCESS :

Preperation (Vacuum test, conditioning etc. )
Sterilization (H2O2 injection, plasma, etc.)
Ventilation (Air Shower)
All process stages are starts and ends automatically.

SECURITY :

There is an urgent stop button in front panel. There is also a visual and audial alarm in case of any error occurs during sterilization.

Device PLC and microcontroller, controls all the parameters used in sterilization automatically. If the sterilization conditions are not reached then the device warns the user and stops the sterilization.

If there is a power outage, depending on the sterilization process stage, program either stops and gives alert or continues the process.

Overload and humid-load alert